Polaris RZR XP900 STS A-Arm Kit

$1,433.25

Shipping calculated at checkout.

The Lone Star Racing STS A-Arm Kit is a direct replacement for the OEM A-Arms. The arms are made from 4130 chromoly for superior strength and are greasable. They will reuse the OEM pivot hardware and ball joints.

Comes as a full set of uppers and lowers

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 Rear Radius Rod Plate

$86.10

Shipping calculated at checkout.

The Lone Star Racing Rear Radius Rod Plate is made from 4130 chromoly for superior strength which helps prevent the rear sections of the frame from twisting, bending or breaking.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 Clutch Cover Pin Kit

$76.65

Shipping calculated at checkout.

The clutch cover pin kit for the Polaris RZR XP900 will allow you to quickly take off your clutch cover in seconds to access the belt. The kit will come with enough parts to run 4 clips and tethers and you can choose where they are easiest to access. The kit will come with all 8 pins to help locate the cover.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP900 +3" MTS Suspension Kit

$2,551.50

Shipping calculated at checkout.

The Lone Star Racing MTS Supension Kit for the Polaris RZR XP900 features front a-arms that are +3" wider per side with +1" of forward placement that allows up to 16.75" of wheel travel. The rear set up uses the stock trailing arm (can upgrade to the Lone Star stock replacement trailing arms) and adds +2 3/8" of width per side allowing up to 16 3/8" of wheel travel. Made from 4130 chromoly for superior strength.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 STS Trailing Arms

$1,415.40

Shipping calculated at checkout.

The Lone Star Racing STS Trailing Arms are a heavy duty, high clearance option to replace the weak factory trailing arms. The arms are made of 4130 chromoly and use a heavy duty 3/4" rod end for superior strength.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Hi-Clearance Sport Lower Radius Rods

$265.65

Shipping calculated at checkout.

The Lone Star Racing Hi-Clearance Sport Lower Radius Rods are the perfect alternative to the stock radius rods for those looking to add strength on a budget. These radius rods are made from 1 1/8" 4130 chromoly for superior strength and come with all hardware.

Will not work on 2017-UP models

Instructions: RZR_XP1K_Radius_Rods.pdf (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Hi-Clearance Sport Lower A-Arms

$513.45

Shipping calculated at checkout.

The Lone Star Racing Hi-Clearance Sport Lower A-Arms are a perfect option for those looking to replace their stock A-Arms with a stronger option on a budget. The A-Arms are made from 4130 chromoly for superior strength and use stock ball joints.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Front Motor Mount

$164.00

Shipping calculated at checkout.

This Lone Star Racing Front Motor Mount is design to replace the weak factory motor mount that is prone to cracking. Made from 4130 chromoly for superior strength.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 / XP900 10 Switch Plate Kit

$68.25

Shipping calculated at checkout.

Add style and function to your XP1000 or XP900 dash with our new 3-piece accessory switch plates. Made from quality laser cut steel for precise switch cutouts to ensure a solid fit. Has 10 switch locations allowing you to add 8 more over stock and are available in no finish or standard Polaris colors. Will fit stock and aftermarket rocker style switches. Comes with black button head fasteners for a clean look.

** Requires marking, cutting and trimming to the stock plastic dash when adding additional switches

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 +3.5" MTS Suspension Kit

Polaris RZR XP1000 +3.5" MTS Suspension Kit

$4,906.65

Shipping calculated at checkout.

The Lone Star Racing MTS suspension Kit for the Polaris RZR XP1000 features front a-arms that are +3.5" wider per side and extended heavy duty tie rods. The rear set up comes with our heavy duty hi clearance trailing arms that are 3.5" wider per side as well. The overall wheel base of the vehicle is extended 3". The kit also comes with a rear radius rod kit that features an LSR radius rod plate for added strength. This kit will achieve about 20" of travel superior performance and handling. Will work with stock shocks however we recommend an aftermarket spring kit available here or aftermarket shocks for best performance.

Features:

Certified 4130 Chromoly
TIG Welded
300M Heat Treated Front & Rear Axle Shafts(Optional)
Powder Coated To Choice Of Color (Optional)

Instructions: RZR_XP1K_Suspension_Kit.pdf (shopify.com)

Will not clear 14" wheels in rear

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP Turbo STS A-Arm Kit

$1,828.05

Shipping calculated at checkout.

The Lone Star Racing STS A-Arm Kit is a direct replacement for the stock XP Turbo A-Arms. The A-Arms are made from 4130 and utilize heavy duty uniballs for superior strength. The arms will come with all hardware.

Allow you to use factory wheels

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP Turbo Hi-Clearance Sport Lower Radius Rods

$265.65

Shipping calculated at checkout.

The Lone Star Racing Hi-Clearance Sport Lower Radius Rods are the perfect alternative to the stock radius rods for those looking to add strength on a budget. These radius rods are made from 1 1/8" 4130 chromoly for superior strength and come with all hardware.

Will not work on 2017-UP models

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP Turbo Hi-Clearance Sport Lower A-Arms

$513.45

Shipping calculated at checkout.

The Lone Star Racing Hi-Clearance Sport Lower A-Arms are a perfect option for those looking to replace their stock A-Arms with a stronger option on a budget. The A-Arms are made from 4130 chromoly for superior strength and use stock ball joints.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR Turbo STS Upper Radius Rod Kit

$306.60

Shipping calculated at checkout.

The Lone Star Racing Upper Radius Rod Kit are a stronger replacement for the OEM radius rods. Made from 4130 chromoly with durable 5/8" rod ends for superior strength and adjustability.

Fits stock width
Come as a pair of upper radius rods

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR Turbo STS Lower Radius Rod Kit

$330.75

Shipping calculated at checkout.

The Lone Star Racing Lower Radius Rod Kit are a stronger replacement for the OEM radius rods. Made from 4130 chromoly with durable 5/8" rod ends for superior strength and adjustability.

Fits stock width
Come as a pair of lower radius rods

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR Turbo S STS Trailing Arms

$2,205.00

Shipping calculated at checkout.

The Lone Star Racing STS Trailing Arms for the Polaris RZR Turbo S are a direct replacement for the OEM trailing arms. They are made from 4130 chromoly and use heavy duty 3/4" rod end for superior strength.

Instructions: TURBO S SUSPENSION INSTALL NOTES (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR Turbo S STS Suspension Kit

$5,644.80

Shipping calculated at checkout.

The Lone Star Racing STS suspension kit for the Polaris XP Turbo S is made as a heavy duty replacment for the stock suspension kit. Made from 4130 chromoly for superior strength and is adjustable so you can dial in your suspension. The kit comes with A-Arms, trailing arms, radius rods, boxed radius rod plate, mud flaps and tie rods.

Front lower A-Arm has oversized 7/8 rod end for camber adjustment on the chassis side
Over and inch of extra ground clearance on the A-Arms compared to stock
Trailing arms incorporate rear floating brake caliper mount
Trailing arms have adjustable spacers for toe adjustment depending on ride height
Race tested and proven kit

Instructions: TURBO S SUSPENSION INSTALL NOTES (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR 800 Steering Rack End

$59.85

Shipping calculated at checkout.

The steering rack end could also be considered the tie-rod. It threads into the steering rack and extends out to the tie rod end. The LSR rack end was designed using a heavier grade steel with a larger ball diameter and increased taper to give it superior strength over the OEM parts. However the rack end is still designed to give under extreme force to help prevent the steering rack from breaking.

Stock width rack end works with all stock or aftermarket suspension widths.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR 800 Rear Frame Gusset Plate

$132.30

Shipping calculated at checkout.

The Lone Star Racing Rear Frame Gusset Plate is designed to reduce frame flex which leads to chassis failure. It also give you two hook points for strapping down or pulling. This plate is made from 4130 chromoly for superior strength.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR 800 +4" MTS Suspension Kit

$5,252.10

Shipping calculated at checkout.

The Lone Star Racing MTS Suspension Kit is +4" wider per side and made from 4130 chromoly for superior strength. The kit includes all A-Arms, front and rear brake line kits and bolt on frame supports.

Some of the OEM pivot hardware will be reused along with the ball joints

Instructions: RZR MTS A-Arms 01.ai (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR 570 MTS Suspension Kit

$4,267.20

Shipping calculated at checkout.

The Lone Star Racing MTS Suspension Kit for the Polaris RZR 570 features front and rear a-arms that are +2.5" wider per side for the "trail" models and will match the stock width on the 2017 "S" models. The kit will come with heavy duty front and rear a-arms. The "trail" model kits will come with brake lines and axle shaft, the "S" model kit will not require those parts and will reuse the OEM parts. Both kits will come with heavy duty tie rods. Since the "trail" and "S" models have completely different sway bar setups we have provided mounting tabs on the lower a-arms so it will require the "trail" model sway bar setup or an aftermarket sway bar. Comes with caster spacers to adjust caster on the front a-arms.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RS1 +3.5" MTS Suspension Kit

$4,906.65

Shipping calculated at checkout.

The Polaris RS1 MTS Suspension Kit features front a-arms that are +3.5" wider per side and extended heavy duty tie rods. The rear set up comes with our heavy duty hi clearance trailing arms that are 3.5" wider per side as well. The overall wheel base of the vehicle is extended 3" (1' forward on a-arms and 2" longer trailing arms). The kit also comes with a rear radius rod kit that features an LSR radius rod plate for added strength. This kit will achieve about 20" of travel for superior performance and handling. Will work with stock shocks however we recommend an aftermarket spring kit available here or aftermarket shocks for best performance.

Features:

Certified 4130 Chromoly
TIG Welded
300M Heat Treated Front & Rear Axle Shafts (Optional)
Powder Coated To Choice Of Color (Optional)
Comes with delrin bushings and inner pivot tubes

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris Outlaw 450MXR/525S Steering Stem w/ Anti-Vibe Clamp (2009-UP)

$495.00

Shipping calculated at checkout.

The Lone Star Racing Steering Stem is made from 4130 chromoly for superior strength and comes with a billet aluminum handlebar clamp kit.

Anti-Vibe clamp only available on +2 stems
+2+0 height is most popular
Fits 2009-UP model years

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris Outlaw 450MXR/525S Sport Style A-Arm Kit

$1,075.20

Shipping calculated at checkout.

The Lone Star Racing Sport A-Arms are +1.25" wider with +1" forward placement per side and made from 4130 chromoly for superior strength. The Sport kit will use stock length shocks but we recommend aftermarket shocks for optimum performance due to the added width. The A-Arms are backed by our Lifetime Warranty.(excluding wear items)

Comes with press in style ball joints

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris Outlaw 450MXR/525S DC-4 A-Arm Kit

$1,101.45

Shipping calculated at checkout.

The Lone Star Racing DC-4 A-Arms are +1.125" wider with 1" forward placement per side. They will require a longer shock for better perfomance and handling and feature caster adjustability. The A-Arms are back by our Lifetime Warranty.(excluding wear items)

Comes with press in style ball joints
Shock Specs:

Extended Length: 18.75"
Shaft Travel: 5 1/4"
Motion Ratio: 2.05:1

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Kawasaki Teryx Front Gusset Plate

$114.45

Shipping calculated at checkout.

The Lone Star Racing Front Gusset Plate is designed to provide a thicker surface for the a-arm mounting points to prevent frame fatigue as well as reduce frame flex between the two sides of the suspension. It also prevents the front a-arms from pulling out of the chassis in the event of an hard hit. Its made from .125" thick 4130 plate. Much stronger and lighter than the competition, that uses mild steel.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Kawasaki KFX450 DC-4 A-Arm Kit

$1,155.00

Shipping calculated at checkout.

The Lone Star Racing DC-4 A-Arms are +2" wider with +1" of forward placement per side. They will require a longer shock for better perfomance and handling and feature easy camber and caster adjustability via heim joints. The A-Arms are back by our Lifetime Warranty.(excluding wear items)

Shock Specs:

EXTENDED = 19.375"
COMPRESSED = 13.875"
LEVERAGE RATIO = 2.11:1

Uses factory hardware in lower mounting points

Instructions: KFX450 A-arms Install 1.ai (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Kawasaki KFX450 Billet Sprocket hub

$230.00

Shipping calculated at checkout.

The Lone Star Racing Billet Sprocket Hub is designed as a slip on hub designed to fit stock or Axcalibar Racing Axles.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Kawasaki KFX450 Billet Disc Brake Hub

$195.00

Shipping calculated at checkout.

The Lone Star Racing Billet Disc Brake Hub is design to reduce weight and improve looks. It will fit on stock or LSR axles.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Kawasaki KFX400 Steering Stem w/ Anti-Vibe Clamp

$495.00

Shipping calculated at checkout.

The Lone Star Racing Steering Stem is made from 4130 chromoly for superior strength and comes with a billet aluminum Anti-Vibe clamp kit to help reduce vibrations and rider fatigue.

+1+0 height is most popular

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Kawasaki KFX400 Sport Style A-Arm Kit

$1,075.00

Shipping calculated at checkout.

The Lone Star Racing Sport A-Arms are +2" wider with +1" of forward placement per side. They are made from 4130 chromoly steel for superior strength and feature our quick camber and quick caster adjustments. The Sport kit will use stock length shocks but we recommend aftermarket shocks to compensate for the additional width. The A-Arms are backed by our Lifetime Warranty.(excluding wear items)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Kawasaki KFX400 DC-4 A-Arm Kit

$1,155.00

Shipping calculated at checkout.

The Lone Star Racing DC-4 A-Arms are +3" wider with no forward placement per side. They are made from 4130 chromoly steel for superior strength and feature our quick camber and heim joint adjustment for caster. The DC-4 kit requires long travel shocks. The A-Arms are backed by our Lifetime Warranty.(excluding wear items)

Model year specific
Shock Specs:

18 1/4" Extended Length

4 7/8" Shaft Travel

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Kawasaki KFX400 Billet Disc Brake Hub

$195.00

Shipping calculated at checkout.

The Lonestar Racing Billet Sprocket Hub is designed as a PRESS on hub designed to fit stock or Axcalibar Racing Axles.

Fits model year 2003-08
It is not threaded but comes with nylon lock nuts to attache the brake rotor using the stock bolts.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX250R Cast Bearing Housing

$215.00

Shipping calculated at checkout.

The Lone Star Racing Cast Bearing Housing features a casted aluminum housing similar to the OEM housing and include heavy duty double row bearings and seals. They are completely sealed and pre-greased so you can just install and ride. Housings are rebuild-able. They fit stock or aftermarket swing arms and axles.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda 250X/300EX Sport Style A-Arm Kit

$1,075.00

Shipping calculated at checkout.

The Lone Star Racing Sport A-Arms are +2 wider with +1" forward placement per side and made from 4130 chromoly for superior strength. The Sport kit will use stock length shocks but we recommend aftermarket shocks for optimum performance due to the added width. The A-Arms are backed by our Lifetime Warranty.(excluding wear items)

Will only fit 1987-2001 model years

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.