Can Am X3 A-Arm Rebuild Hardware

$35.00

Shipping calculated at checkout.

The Rebuild Hardware for LSR A-Arm, both STS and MTS. All items are sold individually.

Upper A-Arm uniball stud
Uniball snap ring
Upper or Lower A-Arm uniball
Uniball spacer
Uniball stud 12 point bolt
Lower A-Arm uniball stud (for non-adjustable models)
Lower A-Arm heim joint, right hand thread. 7L for left hand thread (for adjustable models)
Heim joint right hand thread jam nut. 8L for left hand thread

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 A-Arm Bushing

$6.51

Shipping calculated at checkout.

The Can Am X3 A-Arm Bushing is a direct replacement, high performance, bushing for either stock A-Arms or LSR A-Arms.

Sold individually
2 bushings required per pivot point

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 MTS Suspension Kit

$6,504.75

Shipping calculated at checkout.

The Lone Star Racing MTS Suspension Kit for the Can Am Maverick X3 is +3" wider per side in the front and +2" wider per side in the rear with stock wheel base.(based off the XRS) The kit will come with high clearance front a-arms, high clearance rear trailing arms, radius rods, tie rods, radius rods double sheer gussets, rear mud flaps, radius rod plate, front sway bar links and all necessary hardware. It will feature 24" of suspension travel in the front and rear.

Available with or without LSR 300M axles(uses stock cv's)
Uses stock length XRS shocks
7/8" uniballs with 300M pins in a-arms
5/8" heavy duty rod ends in radius rods
Made from 4130 chromoly tube for superior strength without the unnecessary weight of boxed arms
Double sheer front sway bar mounts
Comes with toe link outer gussets
All kits now feature adjustable lower A-Arms
Race tested

Instructions: x3_mts_kit.pdf (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 STS Suspension Kit

$6,339.90

Shipping calculated at checkout.

The Lone Star Racing STS Suspension Kit for the Can Am Maverick X3 is a direct bolt on kit that is stock length and width for the X3 XRS. The kit will work on the XDS but requires XRS length shocks. The kit will come with high clearance front a-arms, high clearance rear trailing arms, radius rods, tie rods, radius rods double sheer gussets, rear mud flaps, radius rod plate, front and rear sway bar links and all necessary hardware.

Uses stock length XRS shocks
7/8" uniballs with 300M pins in a-arms
5/8" heavy duty rod ends in radius rods
Made from 4130 chromoly tube for superior strength without the unnecessary weight of boxed arms
Double sheer front sway bar mounts
Comes with toe link outer gussets

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 STS HD A-Arm Kit

$2,122.05

Shipping calculated at checkout.

The Lone Star Racing STS HD A-Arm Kit is a heavy duty, hi-clearance, replacement for the stock XRS width a-arms. Made from heavy duty 4130 chromoly with heat treated uniball pins and 7/8" uniballs on the uppers and 7/8" heim joints on the lowers. Comes with front sway bar links. Will work on the XDS model but requires XRS length shocks.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 STS HD Lower A-Arm Kit

$1,025.00

Shipping calculated at checkout.

The Lone Star Racing STS HD Lower A-Arm Kit is a heavy duty, hi-clearance, replacement for the stock XRS width lower a-arms. Made from heavy duty 4130 chromoly with heat treated uniball pins and 7/8" heim joints. Will work on the XDS model but requires XRS length shocks.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 STS HD Trailing Arms

$2,651.25

Shipping calculated at checkout.

The Lone Star Racing STS HD Trailing Arms for the Can Am X3 are a heavy duty replacement option for the XRS trailing arms. They are made from 4130 chromoly and use a 3/4" HD rod end for superior strength.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 STS HD Radius Rods

$308.70

Shipping calculated at checkout.

The Lone Star Racing STS HD Radius Rods for the Can Am X3 are made from 4130 chromoly and use 5/8" rod ends for superior strength. The upper and lower radius rods are the same length and the middle radius rod/toe link comes with our outer box plate kit. This creates a double sheer point on the outer mounting point for added strength and to prevent the bolts from breaking. They are available for the XDS or XRS models.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Race Seat Brackets

$250.00

Shipping calculated at checkout.

The Race Seat Brackets for the Can Am X3 bolt onto the stock seat slilders and allow you to bolt up a hard shell race seat such as Sparco or Impact.

Option for standard or XL width
Starndard width is 16 1/2"
XL width is 17 1/4"
Sold as a pair (2 seats)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 Chassis Gusset Kit

$350.70

Shipping calculated at checkout.

The Lone Star Racing Chassis Gusset Kit for the Can Am X3 is the strongest solution for strengthening the stock frame. This is a weld in kit and it comes with:

Front bulkhead gussets
Steering rack mount gusset
A-Arm mount gussets
Trailing arm mount gussets
Rear upper shock mount gussets

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 Quick Shift Race Plate

$132.30

Shipping calculated at checkout.

The Lone Star Racing Quick Shift Race Plate for the Can Am X3 will go over the factory shift gate and allow you to quickly shift between HI/LO and HI/REVERSE. The shift plate is made from durable stainless steel and bolts into place for a secure fit. The kit comes with a billet aluminum LSR shift knob.

Instructions: x3_shift_plate.pdf (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 Axle Shaft

$245.00

Shipping calculated at checkout.

These are individual axle shafts for stock 72" width cars (STS) or the Lonestar Racing MTS suspension kits.

Measurements:
MTS +3 Axle Lengths
Front Axles = 29.69"
Front Axles with Smart Lock front diff = 30.083"
Rear Axles = 29.25"

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 Pyrotect Fuel Cell

$5,300.00

Shipping calculated at checkout.

The Pyrotect fuel cell is built for the Can Am Maverick X3 and mounts under the seats to keep a low center of gravity and keep it tucked away cleanly.

32 gallons
Comes with bladder, collector
Dual fuel pumps
Has threaded mounts on cell to bolt to
Requires extensive custom fabrication and wiring to install
Does not include hoses

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

HD Stainless Steel Quick Release Fire Extinguisher Mount

HD Stainless Steel Quick Release Fire Extinguisher Mount

$105.00

Shipping calculated at checkout.

Safety is always one of the top priorities at Lone Star Racing. That is why we came up with this new heavy duty quick release fire extinguisher mount. By simply pulling the pin you can slide the fire extinguisher out in a matter of seconds when needed. The mounts are also made from stainless-steel with the LSR logo cut out in them to add style to them as well. The kit comes with both the stainless-steel mounts, quick pull pin, the 2 smaller clamps that attach the mount to the cage, and the 2 bigger clamps that attaches the extinguisher to the quick release mount.

Works on all size tubing
Works with 2.5LB or 5LB fire extinguishers
Fire extinguishers can be purchased along with the mount but is not included

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Can Am X3 ARP Radius Rod Plate Bolt Kit

$78.75

Shipping calculated at checkout.

This ARP heavy duty bolt kit will replace all 6 of the bolts that connect the radius rods to the frame. They are made from 8740 chromoly so they have superior strength over stock and are a "MUST HAVE" for all recreational riders and racers.

This bolt kit will save you from having expensive repairs to your suspension since the factory bolts have an extremely high tendency to wear out or fail do to the high stress or the bolts being over tightened or even shearing in half.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Jack Pin For LSR Suspension

$69.00

Shipping calculated at checkout.

The AGM Jack Pin is made by LSR for our suspension kits with jack mount holes. Works on all AGM jacks.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Electric Jack Weld-On Chassis Mounts

AGM Electric Jack Weld-On Chassis Mounts

$129.99

Shipping calculated at checkout.

Our Weld-on chassis mounts (2 per kit) are made of interlocking 4130 tabs and tubes to take the guess work out of assembly.

The tube centers on the assembled tabs and the tabs come ready to install on 1.5” tubing, but have guide marks on each leg if you would like to sand out to fit 1.75” or 2.0” tubing.

NOTE- Both mounts are identical, so the jack can be installed in the mounts either way. Take care to clock the tubes, when welding together, so that jack will index into mounts in the orientation you desire.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Electric Jack X3 Chassis Mount Kit

$129.99

Shipping calculated at checkout.

Our Can_am Maverick X3 bolt on chassis mounts (2 per kit) are made of interlocking 4130 tabs and tubes to take the guess work out of assembly. Ready to install.

Note: both mounts are identical, so the jack can be installed in the mounts either way.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Universal Hook

$49.99

Shipping calculated at checkout.

Don't want to weld mounts to your chassis? No problem.

You can hook and lift the suspension or chassis with the universal hook or flat pad.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Jack Weld-On Chassis Mount Kit

$69.99

Shipping calculated at checkout.

By far the easiest way to mount your Manual Jack.

Our weld-on chassis mounts are made of interlocking 4130 tabs and tubes to take the guess work out of assembly.

Light weight and simple, the lower mount comes ready to install on 1.5" tubing. (lower mount has guide marks to sand out to 1.75" or 2" tubing, if needed)

Weld top mount directly to chassis or set your own height with stand off tubes/plates.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM "The Electric Jack"

$1,400.00

Shipping calculated at checkout.

Say goodbye to the headache and struggle of unsafe mechanical jacks and weak air jacks and elevate your lifting game with the Electric Jack. This revolutionary tool is here to make lifting your ride effortless, efficient, and above all, safe.

Key Features:

🔌 One-Button Wonder: With the Electric Jack, lifting your vehicle becomes as easy as pushing a switch. No more cranking, pumping, or straining – just smooth and seamless lifting at your fingertips.

🚀 Quick Release Height Adjustment: Need to make on-the-fly adjustments? No problem. The Electric Jack offers quick-release height adjustments, allowing you to fine-tune your lift with precision and speed.

🔋 Battery-Powered Convenience: Say goodbye to manual labor. The Electric Jack is powered by a single drill battery, ensuring portability and hassle-free operation.

💪 Loaded with Features: This multifunction trail tool is not just for lifts; it's packed with features that make it a true all-in-one solution. From vehicle roll-over recoveries to versatile applications, the Electric Jack has you covered.

📏 Impressive Specifications: With a robust 2000 lbs lifting capacity, 14" travel, and a convenient 17" external height adjustment, the Electric Jack is engineered for performance and versatility.

🧳 Compact and Portable: Weighing in at just 17 lbs and collapsing to a mere 35 3/4", the Electric Jack is a space-saving powerhouse. It's no-sink pad design ensures stability and safety during use.

🔌 Battery Interface Options: Choose between Milwaukee or DeWalt battery interfaces to suit your preferences and existing tools.

🔧 Modular Mounting System: Customize your setup with ease. The Electric Jack features a modular mounting system, allowing you to use our lift adapters (Jack Points or Universal Hook) or create your own solution.

🏆 Patented Innovation: The Electric Jack is backed by Patent No. 11,584,624, assuring you of its unique and cutting-edge design.

Upgrade your lifting game with the Electric Jack and experience a new level of convenience and safety. Whether you're new to off-road or a professional, this tool will revolutionize the way you work.

Don't wait to experience the future of lifting technology. Get yours now and discover the power of effortless lifting.

SPECS

Capacity- 2000lbs

Collapsed Length- 35.75 in.

External Height Adjustment-17in.

Travel length- 14in.

Weight- 17lbs

Speed- .48 in/sec

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM The Manual Jack PRO

$1,100.00

Shipping calculated at checkout.

Why wrestle with slow and cumbersome jacks that waste your time on the trail? Say hello to the AGM Manual Jack – your compact and lightweight solution for quick and hassle-free lifts. Whether you're a seasoned off-roader or a weekend adventurer, this jack is your ticket to faster, more efficient repairs.