Can Am Maverick XDS Turbo +3" MTS Suspension Kit

$4,542.30

Shipping calculated at checkout.

The Lone Star Racing MTS Suspension Kit for the Maverick XDS Turbo is the same kit that has been race proven by Murray Motorsports over the years. The kit is +3" wider per side and does not extend the wheelbase. It come with all arms which are made from 4130 chromoly as well as heavy duty tie rods. The kit is available with the option of Lone Star Racing heavy duty axle shafts. Also fits 4-seat Max.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

HD Stainless Steel Quick Release Fire Extinguisher Mount

HD Stainless Steel Quick Release Fire Extinguisher Mount

$105.00

Shipping calculated at checkout.

Safety is always one of the top priorities at Lone Star Racing. That is why we came up with this new heavy duty quick release fire extinguisher mount. By simply pulling the pin you can slide the fire extinguisher out in a matter of seconds when needed. The mounts are also made from stainless-steel with the LSR logo cut out in them to add style to them as well. The kit comes with both the stainless-steel mounts, quick pull pin, the 2 smaller clamps that attach the mount to the cage, and the 2 bigger clamps that attaches the extinguisher to the quick release mount.

Works on all size tubing
Works with 2.5LB or 5LB fire extinguishers
Fire extinguishers can be purchased along with the mount but is not included

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Quick Release Fire Extinguisher Mount

$152.00

Shipping calculated at checkout.

Safety is always one of the top priorities at Lone Star Racing. That is why we came up with our quick release fire extinguisher mount. By simply pulling the pin you can slide the fire extinguisher out in a matter of seconds when needed. The mounts are also made from billet aluminum with the LSR logo machined into them to add style to them as well. The kit comes with both billet mounts, quick pull pin, fire extinguisher mounting plate and 2 clamps.

-available for 1 1/2" - 1 3/4" tubing

-fire extinguisher is available for purchase

-anodized black

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Universal Hook

$49.99

Shipping calculated at checkout.

Don't want to weld mounts to your chassis? No problem.

You can hook and lift the suspension or chassis with the universal hook or flat pad.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Manual Jack Weld-On Chassis Mount Kit

AGM Manual Jack Weld-On Chassis Mount Kit

$69.99

Shipping calculated at checkout.

By far the easiest way to mount your Manual Jack.

Our weld-on chassis mounts are made of interlocking 4130 tabs and tubes to take the guess work out of assembly.

Light weight and simple, the lower mount comes ready to install on 1.5" tubing. (lower mount has guide marks to sand out to 1.75" or 2" tubing, if needed)

Weld top mount directly to chassis or set your own height with stand off tubes/plates.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Electric Jack Weld-On Chassis Mounts

AGM Electric Jack Weld-On Chassis Mounts

$99.99

Shipping calculated at checkout.

Our Weld-on chassis mounts (2 per kit) are made of interlocking 4130 tabs and tubes to take the guess work out of assembly.

The tube centers on the assembled tabs and the tabs come ready to install on 1.5” tubing, but have guide marks on each leg if you would like to sand out to fit 1.75” or 2.0” tubing.

NOTE- Both mounts are identical, so the jack can be installed in the mounts either way. Take care to clock the tubes, when welding together, so that jack will index into mounts in the orientation you desire.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM "The Electric Jack"

$1,389.00

Shipping calculated at checkout.

Why struggle with unsafe mechanical jacks, weak air jacks or limited use screw jacks? Now you can safely lift your ride with zero effort. The Electric Jack makes easy work of any lift with its single button operation and on the fly, quick release height adjustment. The Jack stores using its own force and is powered with a single drill battery. Loaded with features the Electric Jack is truly a multi function trail tool that can even perform vehicle recovery.

14” travel - 17” external height adjustment - 17 lbs. - no sink pad design - works w/Milwaukee or DeWalt batt. - modular mounting system lets you use one of our lift adapters (jack points or Universal hook) or make your own.

NOTE: Jack and components are sold "A La Carte", so you can build exactly what you want.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM "The Manual Jack 2.0"

$979.00

Shipping calculated at checkout.

Tired of slow and heavy jacks? The AGM Manual Jack is the compact, lightweight solutions to these problems. Its quick release height adjustment clamp (change lift point on the fly), concave pad design (prevents pad sink in sand) and modular mounting system (locks the Jack to the vehicle) will give you confidence and peace of mind that whatever life throws at you, you'll fix it fast with the Manual Jack.

14" travel - 17" external height adjustment - 11lbs - no sink pad design - modular mounting system lets you use one of our lift adapters (jack points or universal hook) or make your own.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Impact Genesys II Race Seat

$875.00

Shipping calculated at checkout.

From 5’7”, 150 lbs. to 6’2” 230lbs. the Genesys II seat was designed to fit most drivers with waist measurements up to 44”. This is made possible by utilizing a large shell combined with removable and repositionable side bolster cushions. In addition the channels created by the removable cushions also allow for increased airflow. The seat cushion in the Genesys II uses proprietary higher density foam for increased bottoming resistance and comfort. Deep bolstering and shoulder support provide increased containment, critical in helping to reduce injuries and fatigue due to unwanted body movement. Upholstered with heavy-duty, tear-resistant fabric, the seat cover is fire resistant. Standardized side mounting locations make for easy retrofitting into cockpits already set up for side mounted seats.

Utilizing advanced aerospace manufacturing technology, the new Genesys II seat is the lightest fiberglass seat we’ve ever produced. The technology, utilizing advanced negative displacement “AND” technology, allows for greater consistency while eliminating unnecessary weight. The result is a seat that is 30% lighter than its predecessor, while maintaining superior tensile and compressive properties. The Genesys II also features integrated structural reinforcement panels in areas subjected to torsional stress to ensure strength under load. The Genesys II is compatible with all multi-point restraint systems Impact offers, and is FIA Homologated. MODEL : GRID Q / HOMOLOGATION NO CS.407.18

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Speed Strap 1.75" 3-Point Tire Tie-Down

$85.99

Shipping calculated at checkout.

Each end of this 3-point spare tire tie-down is fully adjustable to allow the center point and ratchet to be positioned right where you want it. Constructed of 1.75″ nylon material, a deluxe wide grip ratchet, and twisted snap hooks. This tie-down is the perfect size for large UTV or smaller Jeep/Truck tires (approx size 32″-38″ tires).

Flat Snap Hooks
1.75″ 3-point ratchet tie down
Fully adjustable
Deluxe, wide grip ratchet
For larger UTV or smaller Jeep/Truck tires

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Baja Designs OnX6+ LED Light Bar

$451.45

Shipping calculated at checkout.

At an impressive 12,460 lumens, the brightest just got up to 69% brighter than our previous generation. The OnX6 + LED light bar also integrates Baja Designs’ trademarked High Speed Spot™ reflector, the same one used by our Team Enlightened racers, to give you the guaranteed furthest projecting LED Light Bar on the planet. In addition, the OnX6 + LED light bar adopts industry standard sizing and is now compatible with aftermarket mounting systems. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

This bar is equipped with BMT – Battery Management Technology

-Elimination Of Flickering at Low Voltage

-Added Protection to Vehicle Wiring and Systems

-Protection from Dangerous Current Spikes

The OnX6+ LED Light Bar is BRIGHTER. BOLDER. BETTER.

Baja Designs Features:
Satisfactions Guarantee – 30 Day Money Back
Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService® – Replaceable Lenses And Optics
ClearView® – All The Light, Right Where You Need It.
MoistureBlock™ – Waterproof, Rain Proof, Submersible
CopperDrive® – Only LED Driven At 100%
5000K Daylight – Less Driver Fatigue, Natural Color

Specifications:
Lumens: (High) 12,460 (Low) 9,230 Utilizing 6 LEDs
Wattage/Amps: (High) 108W / 8.4A (Low) 80W / 5.7A
Dimensions: 10" x 4.29" x 2.69"
Weight: 4.25 lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

Please note that this light does NOT include a harness and the applicable harness to this light is 640119

Includes:

OnX6+ 10" LED Light Bar
Mounting Brackets
Hi-Low Dongle

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (42°) and the spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2) (Also available in amber)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Racer Edition Spot: A 4° beam focus for illumination WAY down the trail or road. The Racer Edition Spot is for speeds of 110+ MPH or if you need to see a mile+ away. This is the latest version for our Team Enlightened racers and is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 5+)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Baja Designs S8 LED Light Bar

$345.45

Shipping calculated at checkout.

Baja Designs' latest LED light bar comes with a few new perks! Enjoy the clean aluminum frame with 6,350 lumens of pure power, low amp draw of 4.00 amps, and nearly 50,000 hours of LED life. The S8 also features high performance, proprietary reflectors, an amber backlit feature, and a unique scalloped housing design. The S8 is backed by our 30 Day Satisfaction Guarantee and Limited Lifetime Warranty giving you the ultimate in purchase protection!

Baja Designs Features:
Satisfactions Guarantee – 30 Day Money Back
Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService® – Replaceable Lenses And Optics
ClearView® – All The Light, Right Where You Need It.
MoistureBlock™ – Waterproof, Rain Proof, Submersible
CopperDrive® – Only LED Driven At 100%
5000K Daylight – Less Driver Fatigue, Natural Color

Specifications:
Lumens: 6,350 Utilizing 8 Cree LEDs
Wattage/Amps:  60W / 4.00A
Dimensions: 10” x 3” x 1.6”
Weight: 2.4 lbs
LED Life Expectancy: 49,930 Hours
Front Lens:  Hard Coated Polycarbonate
Housing:  Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

(S8 Patent D780,964)

Includes:
· S8 10” LED Light Bar
· Mounting Brackets

Please note that this light does NOT include a harness and the applicable harness to this light is 640122

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Speed Strap Ultimate UTV Kit (1.5" Tie-Down Kit)

Speed Strap Ultimate UTV Kit (1.5" Tie-Down Kit)

$209.99

Shipping calculated at checkout.

Rated at 1,300 lb Safe Working Load (SWL) and a 4,000 lb Maximum Rated Capacity (MRC), the 1.5″ tie-downs are built with our signature, wide handle, comfort grip and protective end caps on the barrels to protect your rig. The Ultimate UTV Kit provides all the essential tie-downs for your UTV plus, our revolutionary Pockit-Tow 1/2″ recovery strap, additional protective sleeves, and a convenient storage bag.

Kit includes:
4 – UTV 1.5” X 6’ Ratchet Tie Down w/ Soft Tie
4 – 2” X 20” Fleece Protective Sleeve
1 – 1/2” X 25’ Pockit-Tow Recovery Strap
1 – Large Bag
4 – Speedwraps

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Impact PRO Camlock 5 Point Restraints

$359.95

Shipping calculated at checkout.

Impact delivers on all promises of delivering the most comfortable, easy to tighten restraint on the market. Featuring integral adjusters at the CamLock end, Impact’s newest CamLock restraints solve the issue of adjuster placement and ease of tightening. Constructed of high strength polyester webbing for the greatest strength and longevity, Impact Integral-adjuster restraints are available in the race proven 2” x 2” configuration, in 5-point. There are two mounting configuration options; a bolt-in version, and a snap-in version. Impacts Integral-adjuster, camlock restraints are SFI certified to the more stringent 16.5 specification.

Sold individually

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Switch-Pros RCR-FORCE 12 12 Switch Panel Power System

$1,078.00

Shipping calculated at checkout.

12 Switches | 17 Circuits | 150A

FEATURES:

12 user-programmable switches
RCR-TOUCH™ switch cover
Waterproof, solid state power module
150amp capacity with 17 outputs
- 4 rated @ 35A and 1 rated @ 30A
  (High In-Rush circuits)
- 11 rated @ 15A, which can be combined for larger loads
- 1 Low Side driver switch, rated @ 2A
Built-in Bluetooth module
Program and operate accessories with phone or tablet
System can be used to start vehicle

SWITCH PANEL SPECS:

RCR-Touch™ cover, snaps on for ease of specific switch selection while wearing gloves or riding rough terrain
Switch Panel enclosure measures
4” L x 3” W x .375” H
Splash proof with Polycarbonate overlay faceplate
Pre-machined for factory- look installation
RGB backlighting
Orange LED switch indicators
6 Programmable LED Status indicators

POWER MODULE SPECS:

17 Outputs: 4 rated @ 35A, 1 rated @ 30A, 11 rated @15A, 1 Low Side rated @ 2A
150A maximum rating
7”L x 3.5”W x .5”H (excluding connectors)
Waterproof and Solid State
Underhood rated 125° to -40°C
LED Ignition Input Status Indicator

KIT ALSO INCLUDES

11’ of Communication Cable between Switch Panel and Power Module
Power Cable with 150A inline Circuit protection
100 User Selectable Legends included (Horizontal orientation)
Installation brackets and hardware
Color Coded Output wires
Wire harness with waterproof, sealed automotive grade connectors

SWITCHES CAN BE PROGRAMMED FOR

Preset Dimming function WITH MEMORY (100% to 10% brightness)
Master Mode, with ability to turn multiple outputs On AND Off with one touch
Every Master Switch can control up to 4 other switch outputs
On-On-Off logic
Touch Panel lockout
On/Off or Momentary
Ignition or Battery Input
Flash or Strobe, with User-Selectable Strobe patterns and One Touch activation
Automatic Power-Up upon vehicle start up
Safety Lockout for specific switches
Time Delay off

ADDITIONAL FEATURES:

No bulky relay box
RGB Backlighting with unlimited color options
Three External Trigger inputs can each activate up to four outputs (Active Hi or Active Low)
Sleep Mode for minimal power consumption
Color coded output wires
Daisy Chain up to 3 Switch Panels to One Power Module
Free app for iOs and Android platforms
Splash proof switch panel with Polycarbonate overlay faceplate
LED Input Status Indicators for easy troubleshooting
Battery Voltage Readout on App screen

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.