Honda TRX450 Sport Style A-Arms

$845.00

Shipping calculated at checkout.

The Lone Star Racing Sport Style A-Arms are +2.5" wider with 1" of forward placement per side. They are made from 4130 chromoly steel for superior strength. The upper A-Arms are made from 3/4" tubing and feature our quick camber and easy caster adjustments. The A-Arms will come with new bushings, inner pivot tubes, ball joints and stainless steel tie-rods. The Sport kit uses standard length shocks but work best with aftermarket shocks with proper valving and springs to compensate for the added width.

The A-Arm kit is backed by our Lifetime Warranty.(excluding normal wear items)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 DC-PRO XC A-Arm Kit

$1,504.00

Shipping calculated at checkout.

The Lone Star Racing DC-PRO XC Long Travel A-Arms are our top of the line long travel A-Arm kit made for riders looking for the ultimate performance. The A-Arms are +1" wider with .28" of forward placement per side. They are made from 4130 chromoly for superior strength and are design to be lighter and stronger. They feature a cup style lower ball joint, easy camber adjustment, heim joints on the uppers for precise caster adjustment and use a com bearing / needle bearing setup on the lowers to reduce the amount of resistance throughout the travel. They will utilize a long travel shock for improved leverage ratio's and handling.

Backed by our Lifetime Warranty. (excluding normal wear items)
Designed to work with OEM 2004-05 spindles, or LSR DC-PRO Spindles, and wheel hubs.
Shock specs: 20" L0NG SHOCK
5 7/8" SHAFT LENGTH

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 DC-4 A-Arm Kit

$1,155.00

Shipping calculated at checkout.

The Lone Star Racing Honda TRX450 DC-4 Long Travel A-Arms are +2.5" wider with 1" of forward placement per side. The A-Arms are made from 4130 chromoly tubing for superior strength. The upper A-Arms are made from 3/4" tubing and feature our quick camber and quick caster adjustments. These A-Arms are designed to work with a long travel shock for better handling.

A-Arms are backed by a Lifetime Warranty.(excluding normal wear items)
Shock Specs:

20" LONG SHOCK
5 3/8" SHAFT LENGTH
LEVERAGE RATIO: 2.0 TO 1
10.75" WHEEL TRAVEL 1 1/2" GROUND CLEARANCE WITH 18" TIRES

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 DC-PRO MX A-Arm Kit

$1,504.00

Shipping calculated at checkout.

The Lone Star Racing DC-PRO MX Long Travel A-Arms are our top of the line long travel A-Arm kit made for riders looking for the ultimate performance. The A-Arms are +2.25" wider with .28" of forward placement per side. They are made from 4130 chromoly for superior strength and are design to be lighter and stronger. They feature a cup style lower ball joint, easy camber adjustment, heim joints on the uppers for precise caster adjustment and use a com bearing / needle bearing setup on the lowers to reduce the amount of resistance throughout the travel. They will utilize a long travel shock for improved leverage ratio's and handling.

Backed by our Lifetime Warranty. (excluding normal wear items)
Designed to work with OEM 2004-05 spindles, or LSR DC-PRO Spindles, and wheel hubs.
Shock Specs: 20" L0NG SHOCK
5 7/8" SHAFT LENGTH

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Racing Chassis

$4,000.00

Shipping calculated at checkout.

The Lone Star Racing Honda TRX450R chassis is made from 4130 chromoly steel for added strength over OEM. It is designed to use most all of the OEM components including the stock sub frame. It has optional Pro Peg mounts for nerf bars and optional tabs for CRF electronics, which is used by many racers to eliminate all of the lighting and improve spark.

The 2004-2005 chassis has the motor lowered 5/8" to lower center of gravity and improve handling. Due to this change the OEM airbox and boot combo will not work without modification.

If selecting Pro Peg mounts for nerf bars other than LSR, please specify spacing of nerf bar tubes.
Specify powder coat color in notes.

Notes: TRX450 Chassis.ai (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Sub Frame

$675.00

Shipping calculated at checkout.

The Lone Star Racing Honda TRX450 subframe is made from 4130 chromoly steel for added strength over the OEM subframe. It utilizes all OEM mounting points and sits at stock height.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Gusset Kit

$157.00

Shipping calculated at checkout.

The Lone Star Racing TRX450 gusset kit includes a series of laser cut tabs and pre cut tubes to strengthen the high stress areas of the chassis and help prevent against premature fatigue or failure. We recommend the kits be TIG welded by a professional for proper results.

Instructions: TRX450 Gusset Kit 1.ai (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Swing Arm

$975.00

Shipping calculated at checkout.

The Lone Star Racing Honda TRX450 Swing Arm is made from 4130 chromoly for superior strength. It comes with the front needle bearings and uses all other OEM components. It has optional skid plate mounts but will always come with a mount for a Banshee style rear chain guide. All Honda swing arms are designed to fit the stock carrier or the LSR bearing carriers.

Does not come with bearing carrier.
Uses stock chain slider. (not included)
This swing arm covers all years but is built around 2004-05 lengths. (+1" 2004-05 TRX450 = +.5" on a 2006-UP TRX450)

Instructions: TRX450 Swing Arms.ai (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Axcalibar Pro Racing Axle

$645.00

Shipping calculated at checkout.

The Lone Star Racing Axcalibar Pro Racing Axles are one of the most highly recommended axles on the market for both racers and recreational riders. Each axle is backed by a full Lifetime Warranty, against bending and breaking, unsurpassed by any other axle manufacturer. Each axle is precision machined to exact OEM specifications so all stock or Lone Star Racing accessories can be used. The axles are built from a special stainless material so you no longer have to worry about chrome chipping or rust. Axcalibar axles are easy to install and vastly improve the stability of your ATV while providing extraordinary strength and radiant looks. Axle is fully adjustable for each riders needs.

Fits all years.
Adjustability: stock to +3" overall.
Includes sprocket hub, 6) 1/2" spacers, 2) tapered spacers, 2 castle nuts, 2 hitch pin clips.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Steering Stem w/ Anti-Vibe Clamp

Honda TRX450 Steering Stem w/ Anti-Vibe Clamp

$445.00

Shipping calculated at checkout.

The Lone Star Racing Steering Stem is made from 4130 chromoly for superior strength and comes with a billet aluminum Anti-Vibe clamp kit to help reduce vibrations and rider fatigue.

Comes with mounting plate for the key and oil light
Stabilizer clamp size 1.25"
+1+0 is the most popular height
OEM handlebar clamp will not work with stem

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 DC-PRO Nerf Bars

$445.00

Shipping calculated at checkout.

The Lone Star Racing DC-Pro Nerf Bars were designed based on the collective input from riders and racers all around the world. The DC-Pro Nerf Bars features include a wider foot peg stance with inner crisscross teeth to reduce boot wear, a full 50" mounted width on the MX version and 48" wide on the XC version. They also feature the option of universal removable heel guards or quad specific, net style heel guards. Both the foot pegs and heal guards were designed to help drain out mud and water to avoid clumping. The side profile features an aggressive rake to help prevent tangling with other quads in racing applications. All wear items are completely replaceable and the overall nerf bar is universal to fit most sport quads just using different hardware packages. So if you change quads you do not need to buy a complete new set of nerf bars. The nerf bars are constructed of high quality 6061 aluminum tubing and the heel guards are built from 4130 chromoly tubing that is fully tig welded for superior strength and durability.

Choose from solid or net style heel guards
Will not work with KFX450 or Raptor 700 stock width A-Arms
Comes with all mounting hardware

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 DC-PRO Foot Pegs

$265.00

Shipping calculated at checkout.

The Lone Star Racing DC-PRO Foot Pegs feature a wide foot peg with aggressive inner crisscross teeth to aid in traction and reduce boot wear. They have an aggressive rake on the ends to prevent your foot from slipping off of the peg and can be purchased as just a foot peg or combo them with our heel guards.

Sold as a pair
Comes with pro-peg mounts to bolt to frame.(uses stock bolts)
Heel guards are made from 4130 chromoly. No finish option will be powder coated silver unless otherwise specified.
Heel guards will not work on Raptor 700.
You must drill the foot peg and pro-peg and bolt on using supplied bolts.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 DC-XC Grab Bar

$100.00

Shipping calculated at checkout.

The Lone Star Racing DC-XC Grab Bar features a 2" drop and wide handles for easy lifting of the quad. It also comes with an integrated flat cross mount to attach a number plate to and a flag mount.

Available in raw aluminum or powder coated
Available for 2004-05 and 2006-up models

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Stainless Swing Arm Skid Plate

Honda TRX450 Stainless Swing Arm Skid Plate

$230.00

Shipping calculated at checkout.

The Lone Star Racing Stainless Swing Arm Skid Plate is a heavy duty option for complete swingarm protection. These will bolt right up to the stock swing arm or the Lone Star Racing swing arm and come with a urethane chain guide built in.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Stainless Disc Rotor Guard

$115.00

Shipping calculated at checkout.

The Lone Star Racing Stainless Disc Rotor Guard is a must for XC or MX racing where ground clearance is a must. It protects the brake rotor from rocks and debris without having to use a full skid plate. Pair up with the sprocket guard for superior protection.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Stainless Sprocket Guard

$75.00

Shipping calculated at checkout.

The Lone Star Racing Stainless Sprocket Guard is an excellent option for XC or MX applications where ground clearance is a must. This heavy duty sprocket guard protects the sprocket and chain from rocks and debris. Pair it up with the rotor guard for superior protection.

Fits up to a 42 tooth sprocket

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 DC-PRO Spindles

$755.00

Shipping calculated at checkout.

The DC-PRO Spindles are built to achieve the popular Suzuki LTR450 spindle geometry for superior handling, while allowing you to utilize the factory Honda TRX450 brakes and wheel hubs. These spindles are made from 7075 billet aluminum for superior strength and looks.

Honda TRX450 spindle must run 04-05 TRX450 wheel hubs. All year brakes will work.
Must have A-Arms that will allow the use of "Suzuki" geometry spindles.
Must run Suzuki tapered ball joints and tie rod end.

Notes: DC-PRO Spindle Install Instructions.ai (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 DC-6 Shock Linkage

$455.00

Shipping calculated at checkout.

The Lone Star Racing DC-6 Shock Linkage is designed to work with the stock 2006 & up swing arms or the Lone Star swing arm. It is designed to reduce the shock kick by changing the leverage ratio for smoother shock motion. It also allows for a longer shock for better valving and spring ratios. An aftermarket shock is required for proper performance.

MX - Use a 16 3/8" long shock. 2.44 to 1 leverage ratio.
XC - Use a 16 1/8" long shock. 2.36 to 1 leverage ratio.

Instructions: TRX450 DC-6 Linkage.ai (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Heavy Duty Front Spindle Shafts

$135.00

Shipping calculated at checkout.

The Lone Star Racing Heavy Duty Front Spindle Shafts are a direct replacement for the stock spindle shafts. They are machined from high strength stainless steel for superior strength over the OEM shafts.

Sold as a pair
Press fit part

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Billet Aluminum Front Wheel Hubs

Honda TRX450 Billet Aluminum Front Wheel Hubs

$445.00

Shipping calculated at checkout.

The Lone Star Racing Billet Aluminum Front Wheel Hubs are a perfect way to improve strength and appearance. They come complete as a pair with high performance, sealed bearings and a billet dust cap.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Billet Aluminum Rear Wheel Hubs

Honda TRX450 Billet Aluminum Rear Wheel Hubs

$320.00

Shipping calculated at checkout.

The Lone Star Racing Billet Aluminum Rear Wheel Hubs are one piece rear wheel hubs and are made from 7075 billet aluminum for superior strength and excellent weight savings over stock. The rear wheel hubs have the same pressed in metric studs as stock hubs and will fit the OEM axle as well as the Axcalibar Pro Racing Axle.

Come as a pair
4 x 110 bolt pattern

Instructions: Rear wheel hubs.ai (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Pivot Bolt

$95.00

Shipping calculated at checkout.

The Lone Star Racing Pivot Bolt is made from a hardened steel for superior strength over OEM and zinc plated to resist corrosion.

Uses OEM nut.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Billet Bearing Housing

$225.00

Shipping calculated at checkout.

The Lone Star Racing Billet Aluminum Bearing Housings are machined from 6061 aluminum for superior housing strength. Bearing Carriers are complete, ready to drop in and ride. They come complete with heavy duty double row bearings, seals, and a steel center tube. They feature sealed bearings that are pre-greased and fully rebuild-able. They will fit all stock or aftermarket swing arms and axles.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Billet Aluminum Anti-Fade Locknut

Honda TRX450 Billet Aluminum Anti-Fade Locknut

$275.00

Shipping calculated at checkout.

The Lonestar Racing Billet Aluminum Anti-Fade Locknut is the perfect solution to the troublesome stock locknut. It combines both the locknut and disc brake hub into one unit that is easily adjusted and will not loosen by itself.

Works with stock or LSR axle
Reuses OEM snap ring

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Billet Aluminum Sprocket Hub

Honda TRX450 Billet Aluminum Sprocket Hub

$220.00

Shipping calculated at checkout.

The Lone Star Racing Billet Aluminum Sprocket Hub is made from 7075 aluminum for added strength and to reduce rotating mass. This hub come on the Axcalibar Pro Racing Axle or can be purchased as a replacement part.

This is a press fit part
Does NOT fit OEM axle

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Billet Brake Caliper Mounting Kit

Honda TRX450 Billet Brake Caliper Mounting Kit

$115.00

Shipping calculated at checkout.

The Lone Star Racing Billet Brake Caliper Mounting plate features machined cooling fins to help transfer the heat from the caliper for less brake fade. Will fit stock or aftermarket swing arms.

Comes with brake plate, snap ring and locating bushing.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Billet Steering Stem To Chassis Clamp

$35.00

Shipping calculated at checkout.

The Lone Star Racing Billet Steering Stem To Chassis Clamp is made from billet aluminum with the LSR logo machined in the front for improved looks. The clamp will mount to the stock chassis using the OEM bushing.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

E-Brake Block Off Plate

$20.00

Shipping calculated at checkout.

The Lone Star Racing E-Brake Block Off Plate is used when you remove the emergency brake system from you rear brake caliper. The plate uses the OEM hardware.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Steel Braided Front Brake Line Kit

$125.00

Shipping calculated at checkout.

The Lone Star Racing Steel Braided Front Brake Line Kit features two 54" brake lines that run from the master cylinder to the brake calipers, eliminating the OEM lines that are prone to leak at the "T". The kit will fit stock arms with some slack and extended A-Arms just right.

Universal kit will fit all models unless listed separately

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Steel Braided Rear Brake Line

$55.00

Shipping calculated at checkout.

The Lone Star Racing Steel Braided Rear Brake Line is a high performance replacement for the OEM rear brake lines.

Quick guide to OEM brake line lengths:

Honda ATV

250R=22"
250X/300EX=22"
400EX=25"
TRX450=25"

Yamaha ATV

Blaster(LSR swingarm)=17"
Raptor 250=22"
Warrior(LSR swingarm)=17"
Banshee(LSR swingarm)=17"
YFZ450=25"
YFZ450R=21"
Raptor 660=25"
Raptor 700=25"

Suzuki ATV

LT250(LSR swingarm)=25"
LT500(LSR swingarm)=25"
Z400=27"
LTR450=27"

Kawasaki ATV

KFX400=25"
KFX450=25"

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Billet Brake Line Clamps

$40.00

Shipping calculated at checkout.

The Lone Star Racing Billet Brake Line Clamps are designed to attach your front brake lines directly to the upper a-arms on your ATV.

Sold in pairs(2)
Will work with most aftermarket brake lines
Available in 1", 3/4", or 7/8" diameter

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Rear Fender Braces

$95.00

Shipping calculated at checkout.

The Lone Star Racing Rear Fender Braces are made from 4130 chromoly steel for superior strength and are design to offer support for the OEM rear fenders. They are powdercoated black to prevent corrosion.

Sold as a pair

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Rear Fender Fastners

$20.00

Shipping calculated at checkout.

The Lone Star Racing Rear Fender Fastners are an easy way to fix the common problem of the front fairings of the rear fenders popping out while riding. This setup uses a simple quick release screws and stop plates that install with little modification. One set fixes both sides.

For 2004-05 models

Instructions: TRX450 Fender Fix.ai (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 Seat Latch

$65.00

Shipping calculated at checkout.

The Lone Star Racing Seat Latch helps prevent the seat from unlatching itself during riding. This is a common problem, especially during race conditions. Installs easily in minutes and is zinc plated for corrosion resistance.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Honda TRX450 T.M. Designworks Slide-N-Guide Kit

$145.95

Shipping calculated at checkout.

Complete Slide-N-Guide Kit for stock TRX450R swingarms.
This kit has been used by the top Honda ATV riders and recommended by virtually all the top ATV magazines.
The front Super Slider uses our latest 2-stage noise-reducing chain slap design and low friction material for maximum horsepower.
The lower Powerlip Roller and Rear Chain Guide with replaceable rollers inside complete the kit.
Comes in black
The Chain Slider, lower Roller, and Chain Guide body are backed by TM's exclusive 1-year warranty. (USA only, (excluding Long travel setup and shipping and handling).

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.