Baja Designs OnX6+ LED Light Bar

$451.45

Shipping calculated at checkout.

At an impressive 12,460 lumens, the brightest just got up to 69% brighter than our previous generation. The OnX6 + LED light bar also integrates Baja Designs’ trademarked High Speed Spot™ reflector, the same one used by our Team Enlightened racers, to give you the guaranteed furthest projecting LED Light Bar on the planet. In addition, the OnX6 + LED light bar adopts industry standard sizing and is now compatible with aftermarket mounting systems. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

This bar is equipped with BMT – Battery Management Technology

-Elimination Of Flickering at Low Voltage

-Added Protection to Vehicle Wiring and Systems

-Protection from Dangerous Current Spikes

The OnX6+ LED Light Bar is BRIGHTER. BOLDER. BETTER.

Baja Designs Features:
Satisfactions Guarantee – 30 Day Money Back
Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService® – Replaceable Lenses And Optics
ClearView® – All The Light, Right Where You Need It.
MoistureBlock™ – Waterproof, Rain Proof, Submersible
CopperDrive® – Only LED Driven At 100%
5000K Daylight – Less Driver Fatigue, Natural Color

Specifications:
Lumens: (High) 12,460 (Low) 9,230 Utilizing 6 LEDs
Wattage/Amps: (High) 108W / 8.4A (Low) 80W / 5.7A
Dimensions: 10" x 4.29" x 2.69"
Weight: 4.25 lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

Please note that this light does NOT include a harness and the applicable harness to this light is 640119

Includes:

OnX6+ 10" LED Light Bar
Mounting Brackets
Hi-Low Dongle

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (42°) and the spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2) (Also available in amber)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Racer Edition Spot: A 4° beam focus for illumination WAY down the trail or road. The Racer Edition Spot is for speeds of 110+ MPH or if you need to see a mile+ away. This is the latest version for our Team Enlightened racers and is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 5+)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Speed Strap 1.75" 3-Point Tire Tie-Down

$85.99

Shipping calculated at checkout.

Each end of this 3-point spare tire tie-down is fully adjustable to allow the center point and ratchet to be positioned right where you want it. Constructed of 1.75″ nylon material, a deluxe wide grip ratchet, and twisted snap hooks. This tie-down is the perfect size for large UTV or smaller Jeep/Truck tires (approx size 32″-38″ tires).

Flat Snap Hooks
1.75″ 3-point ratchet tie down
Fully adjustable
Deluxe, wide grip ratchet
For larger UTV or smaller Jeep/Truck tires

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha YXZ1000R Front Bumper

$347.55

Shipping calculated at checkout.

The Lone Star Racing Front Bumper for the YXZ1000R is designed to add strength as well as styling. It is made from 4130 chromoly for superior strength and features and LSR logo welded on and billet end caps.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Speed Strap Ultimate UTV Kit (1.5" Tie-Down Kit)

Speed Strap Ultimate UTV Kit (1.5" Tie-Down Kit)

$209.99

Shipping calculated at checkout.

Rated at 1,300 lb Safe Working Load (SWL) and a 4,000 lb Maximum Rated Capacity (MRC), the 1.5″ tie-downs are built with our signature, wide handle, comfort grip and protective end caps on the barrels to protect your rig. The Ultimate UTV Kit provides all the essential tie-downs for your UTV plus, our revolutionary Pockit-Tow 1/2″ recovery strap, additional protective sleeves, and a convenient storage bag.

Kit includes:
4 – UTV 1.5” X 6’ Ratchet Tie Down w/ Soft Tie
4 – 2” X 20” Fleece Protective Sleeve
1 – 1/2” X 25’ Pockit-Tow Recovery Strap
1 – Large Bag
4 – Speedwraps

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Universal Hook

$77.42

Shipping calculated at checkout.

Don't want to weld mounts to your chassis? No problem.

You can hook and lift the suspension or chassis with the universal hook or flat pad.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM "The Electric Jack"

$1,297.00

Shipping calculated at checkout.

Why struggle with unsafe mechanical jacks, weak air jacks or limited use screw jacks? Now you can safely lift your ride with zero effort. The Electric Jack makes easy work of any lift with its single button operation and on the fly, quick release height adjustment. The Jack stores using its own force and is powered with a single drill battery. Loaded with features the Electric Jack is truly a multi function trail tool that can even perform vehicle recovery.

14” travel - 17” external height adjustment - 17 lbs. - no sink pad design - works w/Milwaukee or DeWalt batt. - modular mounting system lets you use one of our lift adapters (jack points or Universal hook) or make your own.

NOTE: Jack and components are sold "A La Carte", so you can build exactly what you want.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha YXZ1000R Eibach Spring Upgrade Kit

$891.45

Shipping calculated at checkout.

EIBACH PRO-UTV | Stage 2 Performance Spring System (Set of 8 Springs)

Perfect for the weekend warrior! Designed for 2 or 4 seat vehicles, this system delivers the confidence and control you need to keep the hammer down and lead the pack. An adjustable lockout collar is included to allow fine tuning of the transition point of the dual spring setup—for a smooth ride over rough terrain and the higher additional rate to prevent bottoming in the g-outs. You will immediately notice better turn-in response and stay hooked-up to power out of the turns.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha YXZ1000R +3.5" MTS Suspension Kit

Yamaha YXZ1000R +3.5" MTS Suspension Kit

$4,289.25

Shipping calculated at checkout.

The Lone Star Racing MTS Suspension Kit for the YXZ1000R features front a-arms that are +3.5" wider per side and extended heavy duty tie rods. The rear set up comes with our heavy duty arms that are 3.5" wider per side as well. The overall wheel base of the vehicle is kept at standard length for optimal handling and superior wheel travel. The A-arms are made from 4130 chromoly for superior strength.

Includes delron bushings. Uses factory inner pivot tubes

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Baja Designs S8 LED Light Bar

$345.45

Shipping calculated at checkout.

Baja Designs' latest LED light bar comes with a few new perks! Enjoy the clean aluminum frame with 6,350 lumens of pure power, low amp draw of 4.00 amps, and nearly 50,000 hours of LED life. The S8 also features high performance, proprietary reflectors, an amber backlit feature, and a unique scalloped housing design. The S8 is backed by our 30 Day Satisfaction Guarantee and Limited Lifetime Warranty giving you the ultimate in purchase protection!

Baja Designs Features:
Satisfactions Guarantee – 30 Day Money Back
Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService® – Replaceable Lenses And Optics
ClearView® – All The Light, Right Where You Need It.
MoistureBlock™ – Waterproof, Rain Proof, Submersible
CopperDrive® – Only LED Driven At 100%
5000K Daylight – Less Driver Fatigue, Natural Color

Specifications:
Lumens: 6,350 Utilizing 8 Cree LEDs
Wattage/Amps:  60W / 4.00A
Dimensions: 10” x 3” x 1.6”
Weight: 2.4 lbs
LED Life Expectancy: 49,930 Hours
Front Lens:  Hard Coated Polycarbonate
Housing:  Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

(S8 Patent D780,964)

Includes:
· S8 10” LED Light Bar
· Mounting Brackets

Please note that this light does NOT include a harness and the applicable harness to this light is 640122

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft. This pattern is not suitable for driving. (Lighting Zone 7)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Electric Jack Weld-On Chassis Mounts

AGM Electric Jack Weld-On Chassis Mounts

$92.80

Shipping calculated at checkout.

Our Weld-on chassis mounts (2 per kit) are made of interlocking 4130 tabs and tubes to take the guess work out of assembly.

The tube centers on the assembled tabs and the tabs come ready to install on 1.5” tubing, but have guide marks on each leg if you would like to sand out to fit 1.75” or 2.0” tubing.

NOTE- Both mounts are identical, so the jack can be installed in the mounts either way. Take care to clock the tubes, when welding together, so that jack will index into mounts in the orientation you desire.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Manual Jack Weld-On Chassis Mount Kit

AGM Manual Jack Weld-On Chassis Mount Kit

$93.03

Shipping calculated at checkout.

By far the easiest way to mount your Manual Jack.

Our weld-on chassis mounts are made of interlocking 4130 tabs and tubes to take the guess work out of assembly.

Light weight and simple, the lower mount comes ready to install on 1.5" tubing. (lower mount has guide marks to sand out to 1.75" or 2" tubing, if needed)

Weld top mount directly to chassis or set your own height with stand off tubes/plates.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM "The Manual Jack 2.0"

$897.00

Shipping calculated at checkout.

Tired of slow and heavy jacks? The AGM Manual Jack is the compact, lightweight solutions to these problems. Its quick release height adjustment clamp (change lift point on the fly), concave pad design (prevents pad sink in sand) and modular mounting system (locks the Jack to the vehicle) will give you confidence and peace of mind that whatever life throws at you, you'll fix it fast with the Manual Jack.

14" travel - 17" external height adjusment - 11lbs - no sink pad design - modular mounting system lets you use one of our lift adapters (jack points or universal hook) or make your own.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Yamaha YXZ1000R Bolt On Roll Cage w/ Integrated Rear Bumper

Yamaha YXZ1000R Bolt On Roll Cage w/ Integrated Rear Bumper

$2,308.95

Shipping calculated at checkout.

The Lone Star Racing Bolt On Roll Cage for the Yamaha YXZ1000R is designed with two things in mind. First off was to improve the overall look of the car by making the cage flow better and integrating a rear bumper, which isn't available on the stock unit. Secondly we wanted to make the cage stronger by utilizing stronger 4130 chromoly tubing. We also are offering an upgrade option for intrusion V bar and light mounts. Aluminum Roof included.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Sign up and save