Polaris XP1000/XP Turbo A-Arm Rebuild Hardware

Polaris XP1000/XP Turbo A-Arm Rebuild Hardware

$37.15

Shipping calculated at checkout.

This is rebuild hardware for the Lone Star Racing STS or MTS A-Arm kits. All parts are sold individually.

Parts list:

#1 - 3/4" uniball

#2 - uniball stud

#3 - upper uniball spacer

#4 - uniball stud bolt

#5 - uniball snap ring

#6 - delron bushing

#7 - inner pivot tube

#8 - zerk fitting

#9 - heim joint spacer

#10 - 5/8" heim joint

#11 - heim joint jam nut

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 +3.5" MTS Suspension Kit

Polaris RZR XP1000 +3.5" MTS Suspension Kit

$4,906.65

Shipping calculated at checkout.

The Lone Star Racing MTS suspension Kit for the Polaris RZR XP1000 features front a-arms that are +3.5" wider per side and extended heavy duty tie rods. The rear set up comes with our heavy duty hi clearance trailing arms that are 3.5" wider per side as well. The overall wheel base of the vehicle is extended 3". The kit also comes with a rear radius rod kit that features an LSR radius rod plate for added strength. This kit will achieve about 20" of travel superior performance and handling. Will work with stock shocks however we recommend an aftermarket spring kit available here or aftermarket shocks for best performance.

Features:

Certified 4130 Chromoly
TIG Welded
300M Heat Treated Front & Rear Axle Shafts(Optional)
Powder Coated To Choice Of Color (Optional)

Instructions: RZR_XP1K_Suspension_Kit.pdf (shopify.com)

Will not clear 14" wheels in rear

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 STS A-Arm Kit

$1,828.05

Shipping calculated at checkout.

The Lone Star Racing STS A-Arm Kit is a direct replacement for the stock XP1000 A-Arms. The A-Arms are made from 4130 and utilize heavy duty uniballs for superior strength. The arms will come with all hardware.

Allow you to use factory wheels

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Hi-Clearance Sport Lower A-Arms

$513.45

Shipping calculated at checkout.

The Lone Star Racing Hi-Clearance Sport Lower A-Arms are a perfect option for those looking to replace their stock A-Arms with a stronger option on a budget. The A-Arms are made from 4130 chromoly for superior strength and use stock ball joints.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Heavy Duty Tie Rod Kit

$269.85

Shipping calculated at checkout.

This Lone Star Racing Heavy Duty Tie Rod Kit is lighter and way stronger than stock, and made from race proven materials. What separates these apart from all the other kits, is the inner pivot point is in the same location as stock, so it will give you the least amount of bumpsteer as possible.

The tie rod tubes are made from 4130 and are powder-coated textured black. The machined stud and misalignment spacers are made from tough 17-4 stainless. The rod end is an oversized race proven 5/8" size with kevlar race for noise free operation.

2014 does not include inner rack end

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 STS Trailing Arms

$1,415.40

Shipping calculated at checkout.

The Lone Star Racing STS Trailing Arms are a heavy duty, high clearance option to replace the weak factory trailing arms. The arms are made of 4130 chromoly and use a heavy duty 3/4" rod end for superior strength.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Trailing Arm Mud Flap Kit

$149.10

Shipping calculated at checkout.

The Lone Star Racing Trailing Arm Mud Flap Kit for the Polaris XP1000 are a bolt on option that make a great addition to either stock or Lone Star Racing trailing arms. These durable mud flaps feature chromoly steel mounting brackets for superior strength and will help protect the trailing arms, brake rotors and CV's from rocks and debris.

Sold as a pair

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Hi-Clearance Sport Lower Radius Rods

$265.65

Shipping calculated at checkout.

The Lone Star Racing Hi-Clearance Sport Lower Radius Rods are the perfect alternative to the stock radius rods for those looking to add strength on a budget. These radius rods are made from 1 1/8" 4130 chromoly for superior strength and come with all hardware.

Will not work on 2017-UP models

Instructions: RZR_XP1K_Radius_Rods.pdf (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 STS Lower Radius Rod Kit

$330.75

Shipping calculated at checkout.

The Lone Star Racing Lower Radius Rod Kit are a stronger replacement for the OEM radius rods. Made from 4130 chromoly with durable 5/8" rod ends for superior strength and adjustability.

Fits stock width
Come as a pair of lower radius rods

Instructions: RZR_XP1K_Radius_Rods.pdf (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 STS Upper Radius Rod Kit

$292.11

Shipping calculated at checkout.

The Lone Star Racing Upper Radius Rod Kit are a stronger replacement for the OEM radius rods. Made from 4130 chromoly with durable 5/8" rod ends for superior strength and adjustability.

Fits stock width
Come as a pair of upper radius rods

Intructions: RZR_XP1K_Radius_Rods.pdf (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Rear Radius Rod Plate

$66.15

Shipping calculated at checkout.

The Lone Star Racing Rear Radius Rod Plate is made from 4130 chromoly for superior strength which helps prevent the rear sections of the frame from twisting, bending or breaking.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Boxed Rear Radius Rod Plate

$139.65

Shipping calculated at checkout.

The Lone Star Racing Rear Radius Rod Plate is made from 4130 chromoly and is boxed for superior strength which helps prevent the rear sections of the frame from twisting, bending or breaking. This boxed plate will create a double shear point and is a must have for anyone racing or planning on driving aggressively.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Frame Gusset Kit

$147.00

Shipping calculated at checkout.

This Lone Star Racing Frame Gusset Kit will help strengthen the weaker areas of the frame. It comes with 16 chromoly washers to to strengthen the a-arm mounting points,6 plates to strengthen the trailing arm mounting points, sway bar gussets to strengthen sway bar mounting points, 4 triangular gussets and 1 gusset plate to strengthen the front of the chassis. For race applications we recommend the rear frame skid plate which is sold separately.

Instructions: RZR_XP1K_Gusset_Kit.pdf (shopify.com)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Adjustable Sway Bar Links

Polaris RZR XP1000 Adjustable Sway Bar Links

$135.45

Shipping calculated at checkout.

The Lone Star Racing Adjustable Sway Bar Links are made from billet aluminum for superior strength over stock. These are a direct replacement for the stock links and are adjustable.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Bolt On Roll Cage w/Integrated Rear Bumper

Polaris RZR XP1000 Bolt On Roll Cage w/Integrated Rear Bumper

$2,180.85

Shipping calculated at checkout.

The Lone Star Racing Bolt On Roll Cage for the Polaris XP1000 is designed with two things in mind. First off was to improve the overall look of the car by making the cage flow better and integrating a rear bumper. Secondly we wanted to make the cage stronger by utilizing stronger 4130 chromoly steel tubing. We also are offering an upgrade of a windshield V bar and light mounts for your LED light bars.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Rear Frame Skid Plate

$55.13

Shipping calculated at checkout.

This Lone Star Racing Rear Frame Skid Plate is a large weld in plate that provides additional strength to the rear section of the frame while protecting the transmission from rocks and debris.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Pyrotect Under Seat Fuel Cell

$3,200.00

Shipping calculated at checkout.

The Pyrotect fuel cell is built for the Polaris RZR XP1000 2 seat car and mounts under the seats to keep a low center of gravity and keep it tucked away cleanly.

-Holds 20 gallons of fuel

-Comes with bladder, collector, sending unit, internal fuel pump

-Has threaded mounts on cell to bolt to but custom mounts must be fabricated on car

-Requires relocation of battery

-Does not include hoses

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Heavy Duty Axle Shafts

$245.00

Shipping calculated at checkout.

The Lone Star Racing Heavy Duty Axle Shafts are a stronger replacement for the factory axles. They are available for stock width or our +3.5" MTS suspension kit. The axles are made from heat treated 300M for superior strength.

If you are buying new CV's from Polaris you will need the most recent model year axle shaft.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Front Motor Mount

$164.00

Shipping calculated at checkout.

This Lone Star Racing Front Motor Mount is design to replace the weak factory motor mount that is prone to cracking. Made from 4130 chromoly for superior strength.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 ARP Complete Suspension Bolt Kit

$483.00

Shipping calculated at checkout.

This is a must have complete ARP bolt kit for the RZR XP1000. The kit utilizes ARP 8740 chromoly bolts for superior strength over stock bolts that are prone to breaking causing very expensive suspension repairs.

This kit will replace the following bolts:

Spindle Kit
Lower Shock Kit
A-Arm Complete Kit
Radius Plate Kit
Radius To Knuckle Kit
Knuckle to Trailing Arm Kit

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 ARP Radius Rod Plate Bolt Kit

$57.75

Shipping calculated at checkout.

This ARP heavy duty bolt kit will replace all of the bolts that connect the radius rods to the frame. They are made from 8740 chromoly so they have superior strength over stock and are a "MUST HAVE" for all recreational riders and racers.

This bolt kit will save you from having expensive repairs to your suspension since the factory bolts have an extremely high tendency to wear out or fail do to the high stress or the bolts being over tightened or even shearing in half.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 ARP Rear Knuckle Bolt Kit

$68.25

Shipping calculated at checkout.

This heavy duty ARP bolt kit will replace all of the bolts that connect the upper and lower radius rods bolt to the hubs / knuckles. They are made from 8740 chromoly so they have superior strength over stock and are a "MUST HAVE" for all recreational riders and racers.

This bolt kit will save you from having expensive repairs to your suspension since the factory bolts have an extremely high tendency to wear out or fail do to the high stress or the bolts being over tightened or even shearing in half.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 ARP A-Arm Mounting Bolt Kit

$131.25

Shipping calculated at checkout.

This ARP heavy duty bolt kit will replace all of the a-arm bolts where the arms connect to the frame. They are made from 8740 chromoly so they have superior strength over stock and are a "MUST HAVE" for all recreational riders and racers.

This bolt kit will save you from having expensive repairs to your suspension since the factory bolts have an extremely high tendency to wear out or fail do to the high stress.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 ARP Spindle Bolt Kit

$57.75

Shipping calculated at checkout.

This heavy duty ARP direct replacement bolt kit is an absolute MUST. It will replace the bolts that connect all four a-arms to the front spindles. These will work with balljoints or uniball studs. They are made from 8740 chromoly for superior strength over stock.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 ARP Lower Shock Mount Bolt Kit

$36.75

Shipping calculated at checkout.

This ARP heavy duty bolt kit will replace the lower shock bolts where the shocks connect to the A-Arms. They are made from 8740 chromoly so they have superior strength over stock and are a "MUST HAVE" for all recreational riders and racers.

This bolt kit will save you from having expensive repairs to your suspension since the factory bolts have an extremely high tendency to wear out or fail do to the high stress.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 ARP Transmission Retention Plate Bolt Kit

$39.90

Shipping calculated at checkout.

This ARP bolt kit will replace all of the bolts for the retention plate inside of the transmission. This is the plate that holds the pinion on to the transmission. They are made from 8740 chromoly so they have superior strength over stock.

This bolt kit will save you from having expensive repairs to your transmission since the factory bolts have an extremely high tendency to wear out or fail do to the high stress or the bolts being over tightened or even shearing in half.

** Turbo & Non-Turbo Kits are different

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Quick Release Fire Extinguisher Mount

$152.00

Shipping calculated at checkout.

Safety is always one of the top priorities at Lone Star Racing. That is why we came up with our quick release fire extinguisher mount. By simply pulling the pin you can slide the fire extinguisher out in a matter of seconds when needed. The mounts are also made from billet aluminum with the LSR logo machined into them to add style to them as well. The kit comes with both billet mounts, quick pull pin, fire extinguisher mounting plate and 2 clamps.

-available for 1 1/2" - 1 3/4" tubing

-fire extinguisher is available for purchase

-anodized black

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Jack Pin

$69.00

Shipping calculated at checkout.

The AGM Jack Pin is made by LSR for our suspension kits with jack mount holes. Works on all AGM jacks.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Speed Strap 1.75" 3-Point Tire Tie-Down

$85.99

Shipping calculated at checkout.

Each end of this 3-point spare tire tie-down is fully adjustable to allow the center point and ratchet to be positioned right where you want it. Constructed of 1.75″ nylon material, a deluxe wide grip ratchet, and twisted snap hooks. This tie-down is the perfect size for large UTV or smaller Jeep/Truck tires (approx size 32″-38″ tires).

Flat Snap Hooks
1.75″ 3-point ratchet tie down
Fully adjustable
Deluxe, wide grip ratchet
For larger UTV or smaller Jeep/Truck tires

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Baja Designs OnX6+ LED Light Bar

$451.45

Shipping calculated at checkout.

At an impressive 12,460 lumens, the brightest just got up to 69% brighter than our previous generation. The OnX6 + LED light bar also integrates Baja Designs’ trademarked High Speed Spot™ reflector, the same one used by our Team Enlightened racers, to give you the guaranteed furthest projecting LED Light Bar on the planet. In addition, the OnX6 + LED light bar adopts industry standard sizing and is now compatible with aftermarket mounting systems. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

This bar is equipped with BMT – Battery Management Technology

-Elimination Of Flickering at Low Voltage

-Added Protection to Vehicle Wiring and Systems

-Protection from Dangerous Current Spikes

The OnX6+ LED Light Bar is BRIGHTER. BOLDER. BETTER.

Baja Designs Features:
Satisfactions Guarantee – 30 Day Money Back
Guarantee
Limited Lifetime Warranty – Complete Purchase Protection
uService® – Replaceable Lenses And Optics
ClearView® – All The Light, Right Where You Need It.
MoistureBlock™ – Waterproof, Rain Proof, Submersible
CopperDrive® – Only LED Driven At 100%
5000K Daylight – Less Driver Fatigue, Natural Color

Specifications:
Lumens: (High) 12,460 (Low) 9,230 Utilizing 6 LEDs
Wattage/Amps: (High) 108W / 8.4A (Low) 80W / 5.7A
Dimensions: 10" x 4.29" x 2.69"
Weight: 4.25 lbs
LED Life Expectancy: 49,930 Hours
Front Lens: Hard Coated Polycarbonate
Housing: Aircraft Grade Aluminum w/Mil-Spec Hard Anodize
Bezel: Billet Machined Aluminum
Hardware & Bracket Material: Stainless Steel
Exceeds MIL-STD810G (Mil-Spec Testing)
Built-In Overvoltage Protection
IP69K (Waterproof up to 9ft & Pressure Washable)
IK10 Compliant (Mechanical Impact Testing)

Please note that this light does NOT include a harness and the applicable harness to this light is 640119

Includes:

OnX6+ 10" LED Light Bar
Mounting Brackets
Hi-Low Dongle

Patterns:

Driving/Combo: Maximum trail coverage in a single light. The Driving/Combo pattern is equipped with both Wide Driving (42°) and the spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2) (Also available in amber)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road. The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Racer Edition Spot: A 4° beam focus for illumination WAY down the trail or road. The Racer Edition Spot is for speeds of 110+ MPH or if you need to see a mile+ away. This is the latest version for our Team Enlightened racers and is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 5+)

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM Universal Hook

$49.99

Shipping calculated at checkout.

Don't want to weld mounts to your chassis? No problem.

You can hook and lift the suspension or chassis with the universal hook or flat pad.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Speed Strap Ultimate UTV Kit (1.5" Tie-Down Kit)

Speed Strap Ultimate UTV Kit (1.5" Tie-Down Kit)

$209.99

Shipping calculated at checkout.

Rated at 1,300 lb Safe Working Load (SWL) and a 4,000 lb Maximum Rated Capacity (MRC), the 1.5″ tie-downs are built with our signature, wide handle, comfort grip and protective end caps on the barrels to protect your rig. The Ultimate UTV Kit provides all the essential tie-downs for your UTV plus, our revolutionary Pockit-Tow 1/2″ recovery strap, additional protective sleeves, and a convenient storage bag.

Kit includes:
4 – UTV 1.5” X 6’ Ratchet Tie Down w/ Soft Tie
4 – 2” X 20” Fleece Protective Sleeve
1 – 1/2” X 25’ Pockit-Tow Recovery Strap
1 – Large Bag
4 – Speedwraps

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Heavy Duty Rear Swaybar

$499.80

Shipping calculated at checkout.

This Lone Star Racing Heavy Duty Rear Swaybar is the perfect set up for race or play! Is made from 4130 heat treated chromoly for superior strength over stock and is 2-3 lbs lighter as well. It comes with the adjustable billet aluminum arms so you can increase or decrease body roll and stiffness of the rear suspension depending on what type of riding you are doing.

Adjustable billet links are available separately and highly recommended to be run with this swaybar to maximize performance.
2 seater XP Turbo models comes with sway bar bushings.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

AGM "The Electric Jack"

$1,389.00

Shipping calculated at checkout.

Why struggle with unsafe mechanical jacks, weak air jacks or limited use screw jacks? Now you can safely lift your ride with zero effort. The Electric Jack makes easy work of any lift with its single button operation and on the fly, quick release height adjustment. The Jack stores using its own force and is powered with a single drill battery. Loaded with features the Electric Jack is truly a multi function trail tool that can even perform vehicle recovery.

14” travel - 17” external height adjustment - 17 lbs. - no sink pad design - works w/Milwaukee or DeWalt batt. - modular mounting system lets you use one of our lift adapters (jack points or Universal hook) or make your own.

NOTE: Jack and components are sold "A La Carte", so you can build exactly what you want.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Polaris RZR XP1000 Clutch Cover Pin Kit

$76.65

Shipping calculated at checkout.

The clutch cover pin kit for the Polaris RZR XP1000 will allow you to quickly take off your clutch cover in seconds to access the belt. The kit will come with enough parts to run 4 clips and tethers and you can choose where they are easiest to access. The kit will come with all 8 pins to help locate the cover.

Will not work with XP Turbo or 2017+ XP1000

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.