E-Brake Block Off Plate

$16.80

Shipping calculated at checkout.

The Lone Star Racing E-Brake Block Off Plate is used when you remove the emergency brake system from you rear brake caliper. The plate uses the OEM hardware.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Steel Braided Rear Brake Line

$48.30

Shipping calculated at checkout.

The Lone Star Racing Steel Braided Rear Brake Line is a high performance replacement for the OEM rear brake lines.

Quick guide to OEM brake line lengths:

Honda ATV

250R=22"
250X/300EX=22"
400EX=25"
TRX450=25"

Yamaha ATV

Blaster(LSR swingarm)=17"
Raptor 250=22"
Warrior(LSR swingarm)=17"
Banshee(LSR swingarm)=17"
YFZ450=25"
YFZ450R=21"
Raptor 660=25"
Raptor 700=25"

Suzuki ATV

LT250(LSR swingarm)=25"
LT500(LSR swingarm)=25"
Z400=27"
LTR450=27"

Kawasaki ATV

KFX400=25"
KFX450=25"

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Steel Braided Front Brake Line Kit

$114.45

Shipping calculated at checkout.

The Lone Star Racing Steel Braided Front Brake Line Kit features two 54" brake lines that run from the master cylinder to the brake calipers, eliminating the OEM lines that are prone to leak at the "T". The kit will fit stock arms with some slack and extended A-Arms just right.

Universal kit will fit all models unless listed separately

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Billet Brake Line Clamps

$36.33

Shipping calculated at checkout.

The Lone Star Racing Billet Brake Line Clamps are designed to attach your front brake lines directly to the upper a-arms on your ATV.

Sold in pairs(2)
Will work with most aftermarket brake lines
Available in 1", 3/4", or 7/8" diameter

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Universal ATV Light Mount

$26.25

Shipping calculated at checkout.

The Lone Star Racing Universal ATV Light Mount is designed to attach in between the steering stem and handlebar clamp so you can have light in any direction you turn the bars.

Fits almost every stock and aftermarket ATV steering stem
Works with the Rigid SR & E Series light bars
Comes in flat black powder coat
Available in 6" or 10"
Will not fit on Yamaha OEM steering stems
Does not include light

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

KTM 450SX/505SX Billet Bearing Housing

$219.45

Shipping calculated at checkout.

The Lone Star Racing Billet Aluminum Bearing Housings are machined from 6061 aluminum for superior housing strength. Bearing Carriers are complete, ready to drop in and ride. They come complete with heavy duty double row bearings, seals, and a steel center tube. They feature sealed bearings that are pre-greased and fully rebuild-able. They will fit all stock or aftermarket swing arms and axles.

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

KTM 450SX/505SX Axcalibar Pro Racing Axle

$439.95

Shipping calculated at checkout.

The Lone Star Racing Axcalibar Pro Racing Axles are one of the most highly recommended axles on the market for both racers and recreational riders. Each axle is backed by a LIFETIME WARRANTY unsurpassed by any other axle manufacturer. Each axle is precision machined to exact OEM specifications so all stock or Lone Star Racing accessories can be used. The axles are built from a special stainless material so you no longer have to worry about chrome chipping or rust. Axcalibar axles are easy to install and vastly improve the stability of your ATV while providing extraordinary strength and radiant looks. Axle is fully adjustable for each riders needs.

Adjustable from -4" TO STOCK
Uses the 450/505 SX axle clips: Part number 83510063100

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

KTM 450SX/505SX DC-PRO Nerf Bars

$423.15

Shipping calculated at checkout.

The Lone Star Racing DC-Pro Nerf Bars were designed based on the collective input from riders and racers all around the world. The DC-Pro Nerf Bars features include a wider foot peg stance with inner crisscross teeth to reduce boot wear, a full 50" mounted width on the MX version and 48" wide on the XC version. They also feature the option of universal removable heel guards or quad specific, net style heel guards. Both the foot pegs and heal guards were designed to help drain out mud and water to avoid clumping. The side profile features an aggressive rake to help prevent tangling with other quads in racing applications. All wear items are completely replaceable and the overall nerf bar is universal to fit most sport quads just using different hardware packages. So if you change quads you do not need to buy a complete new set of nerf bars. The nerf bars are constructed of high quality 6061 aluminum tubing and the heel guards are built from 4130 chromoly tubing that is fully tig welded for superior strength and durability.

Will not work with KFX450 or Raptor 700 stock width A-Arms
Comes with all mounting hardware

Parts Stock

While we try to keep product in stock, unfortunately we aren’t able to keep all products on the shelf at all times. Some products could have a lead time of 10 weeks or more. We do ask that if you are needing to order a product that is time sensitive that you call us and check stock/eta on that part before proceeding. We also have distributors that might have the part you are looking for in stock and we can point you in that directions. Some parts are subject to a restock fee.

Currency

Sign up and save