Polaris Outlaw 450MXR & 525S

The Lone Star Racing E-Brake Block Off Plate is used when you remove the emergency brake system from you rear brake caliper. The plate uses the OEM hardware.

The Lone Star Racing Steel Braided Rear Brake Line is a high performance replacement for the OEM rear brake lines.

Quick guide to OEM brake line lengths:

Honda ATV

• 250R=22"
• 250X/300EX=22"
• 400EX=25"
• TRX450=25"

Yamaha ATV

• Blaster(LSR swingarm)=17"
• Raptor 250=22"
• Warrior(LSR swingarm)=17"
• Banshee(LSR swingarm)=17"
• YFZ450=25"
• YFZ450R=21"
• Raptor 660=25"
• Raptor 700=25"

Suzuki ATV

• LT250(LSR swingarm)=25"
• LT500(LSR swingarm)=25"
• Z400=27"
• LTR450=27"

Kawasaki ATV

• KFX400=25"
• KFX450=25"



The Lone Star Racing Steel Braided Front Brake Line Kit features two 54" brake lines that run from the master cylinder to the brake calipers, eliminating the OEM lines that are prone to leak at the "T". The kit will fit stock arms with some slack and extended A-Arms just right.

• Universal kit will fit all models unless listed separately 

The Lone Star Racing Billet Brake Line Clamps are designed to attach your front brake lines directly to the upper a-arms on your ATV.

• Sold in pairs(2)
• Will work with most aftermarket brake lines
• Available in 1", 3/4", or 7/8" diameter

These Precision Steering stabilizers have full adjustability, impact damping, and full billet mounting for superior strength.

Pro Model has a built in reservoir to allow for thermal expansion and a stronger linkage, stem clamp, and lever.

Elite Model has all the same great features with 60% better impact damping and larger wear surfaces.

• Adjust the center stiffer than the sides or the sides stiffer than the center. Whether you prefer 10% firmer or 50% the range is huge!
• If conditions are slippery or loose: Firm up the center and soften up the sides. This will help you steer into your slide quicker and then the stabilizer will catch the back of the quad as it goes toward center reducing fishtailing.
• Want more stability when going fast and straight and less resistance when turning? You can easily tune the Precision Stabilizer to your liking.

The Shock & Vibe acts as suspension for your handlebars. The Quad's frame moves up and down and pitches left to right while the bars are suspended by the Shock & Vibe Clamp.

This gives the feel, from the rider’s perspective, that the bars are not moving, but are staying parallel to the course.

Without the bars being jerked, the quad's movement is felt in the foot-pegs as the quad kicks left to right.

This allows the rider to keep balance and position over the quad by just lifting a leg as the peg rises.

• If purchased for LSR stem it will come with anti-vibe hardware to make it work.

At an impressive 12,460 lumens, the brightest just got up to 69% brighter than our previous generation.  The OnX6 + LED light bar also integrates Baja Designs’ trademarked High Speed Spot™ reflector, the same one used by our Team Enlightened racers, to give you the guaranteed furthest projecting LED Light Bar on the planet.  In addition, the OnX6 + LED light bar adopts industry standard sizing and is now compatible with aftermarket mounting systems. An industry first 30 Day Satisfaction Guarantee & Limited Lifetime Warranty is included for the ultimate in purchase protection.

This bar is equipped with BMT – Battery Management Technology

-Elimination Of Flickering at Low Voltage

-Added Protection to Vehicle Wiring and Systems

-Protection from Dangerous Current Spikes
 
The OnX6+ LED Light Bar is BRIGHTER. BOLDER. BETTER.

Please note that this light does NOT include a harness and the applicable harness to this light is 640119

Includes:

• OnX6+ 10" LED Light Bar
• Mounting Brackets
• Hi-Low Dongle

Patterns:

Driving/Combo: Maximum trail coverage in a single light.  The Driving/Combo pattern is equipped with both Wide Driving (42°) and the spot (6°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving:  BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2) (Also available in amber)

High Speed Spot: A longer and narrower 6° beam focus for illumination further down the trail or road.  The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Racer Edition Spot:  A 4° beam focus for illumination WAY down the trail or road.  The Racer Edition Spot is for speeds of 110+ MPH or if you need to see a mile+ away. This is the latest version for our Team Enlightened racers and is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 5+)

The Stage 3 is our most popular shock model and it can turn your ATV into a real performance machine with true sports capabilities

The Stage 3 model is derived directly from our top-end Stage 5 model, with which it shares most of the same components. It features a single external compression adjustment knob that controls the low-speed compression damping that is combined with an internal high-speed blow-off circuit which relieves peak pressure upon impacts to achieve race-level performance in a package that is more accessible and easier to adjust.

STAGE 3 // BENEFITS

• Designed for intensive applications and spirited riding
• Turns your ATV into a more capable machine that can carry more speed over rough terrain and bumps
• Perfect choice for riders looking for a reservoir-type shock with simple but effective adjustability
• Provides increased stability, more traction and better protection against bottom-out

Sold as a pair

** When placing your online order please add your shock set up details listed below in the "Comments" section of the check out screen:

Model of ATV

Type of A-arms 

Rear swing arm length (stock or +?)

Rear swing arm shock linkage (Stock or type)

Rider Weight (In full Gear)

Type of Riding (Recreational, Motocross, Dunes, Cross Country, or Desert)

Rider Skill Level (A class, B class intermediate, or Pro)

All shocks are built to order and are non-returnable

The Stage 4 shocks offer the performance of our latest technology in a package that is more accessible and easier to use. They are ideal for racers and weekend warriors who are looking for high-performance shocks with great adjustability of key parameters.

Adjustments:

– Low-Speed Compression
– Rebound
– Spring Preload

** When placing your online order please add your shock set up details listed below in the "Comments" section of the check out screen:

Model of ATV

Year of ATV

Rear swing arm length (stock or +?)

Rear swing arm shock linkage (Stock or type)

Rider Weight (In full Gear)

Type of Riding (Recreational, Motocross, Dunes, Cross Country, or Desert)

Rider Skill Level (A class, B class intermediate, or Pro)

** ALL SHOCKS ARE BUILT TO ORDER AND ARE NON- RETURNABLE**

The Stage 5 shocks are our top-end model featuring High-Flow technology, ultra-lightweight design and low-friction internal components. They are ideal for racers and enthusiasts who are looking for maximum performance and total control over all suspension parameters without compromise.

Adjustments:

– High-Speed Compression
– Low-Speed Compression
– Rebound
– Spring Preload

** When placing your online order please add your shock set up details listed below in the "Comments" section of the check out screen:

Model of ATV

Year of ATV

Rear swing arm length (stock or +?)

Rear swing arm shock linkage (Stock or type)

Rider Weight (In full Gear)

Type of Riding (Recreational, Motocross, Dunes, Cross Country, or Desert)

Rider Skill Level (A class, B class intermediate, or Pro)

** ALL SHOCKS ARE BUILT TO ORDER AND ARE NON- RETURNABLE**

The Stage 5 shocks are our top-end model featuring High-Flow technology, ultra-lightweight design and low-friction internal components. They are ideal for racers and enthusiasts who are looking for maximum performance and total control over all suspension parameters without compromise.

Adjustments:

– High-Speed Compression
– Low-Speed Compression
– Rebound
– Spring Preload

Sold as a pair

** When placing your online order please add your shock set up details listed below in the "Comments" section of the check out screen:

Model of ATV

Type of A-arms (standard or Long Travel)

Rear swing arm length (stock or +?)

Rear swing arm shock linkage (Stock or type)

Rider Weight (In full Gear)

Type of Riding (Recreational, Motocross, Dunes, Cross Country, or Desert)

Rider Skill Level (A class, B class intermediate, or Pro)

** ALL SHOCKS ARE BUILT TO ORDER AND ARE NON- RETURNABLE**

The Stage 1 is our most accessible entry-level shock model designed to upgrade your ATV’s suspension beyond the capabilities of the stock shocks

If you believe that your stock shocks are “good enough”, you probably never tried a set of properly calibrated aftermarket shocks. It is amazing how much difference our Stage 1 can make on your ATV. Even if you just cruise along at moderate speed, these shocks will erase the bumps and get rid of the vibration so you can ride comfortably and in perfect control. However, the more you press the throttle, the more your Stage 1 shocks will come alive and make a night-and-day difference to the handling and performance of your ATV.

STAGE 1 // BENEFITS

• To upgrade or replace stock shocks, often at a comparable price to OEM shocks
• Our most accessible entry-level model
• Simple to use, bolt-on upgrade for improved handling, stability and comfort
• Vehicle-specific tuning, calibrated for your personal weight and type of riding
• Same quality components and careful craftsmanship as our higher-end models

Sold as a pair

** When placing your online order please add your shock set up details listed below in the "Comments" section of the check out screen:

Model of ATV

Type of A-arms 

Rear swing arm length (stock or +?)

Rear swing arm shock linkage (Stock or type)

Rider Weight (In full Gear)

Type of Riding (Recreational, Motocross, Dunes, Cross Country, or Desert)

Rider Skill Level (A class, B class intermediate, or Pro)

All shocks are built to order and are non-returnable

The Lone Star Racing Steering Stem  is made from 4130 chromoly for superior strength and comes with a billet aluminum handlebar clamp kit. 

• Anti-Vibe clamp only available on +2 stems
• +2+0 height is most popular
• Fits 2007-08 model years

Baja Designs' latest LED light bar comes with a few new perks! Enjoy the clean aluminum frame with 6,350 lumens of pure power, low amp draw of 4.00 amps, and nearly 50,000 hours of LED life.  The S8 also features high performance, proprietary reflectors, an amber backlit feature, and a unique scalloped housing design. The S8 is backed by our 30 Day Satisfaction Guarantee and Limited Lifetime Warranty giving you the ultimate in purchase protection! 

Includes:
·         S8 10” LED Light Bar
·         Mounting Brackets
 
Please note that this light does NOT include a harness and the applicable harness to this light is 640122

Patterns:

Driving/Combo:  Maximum trail coverage in a single light.  The Driving/Combo pattern is equipped with both Driving (42°) and spot (9°) optics to provide you with a smooth blend of light for both near field applications and distance (Lighting Zone 3)

Wide Driving: BD was the first to develop a pattern specifically for cornering, dust and/or fog conditions. The Wide Driving pattern offers a 42° flattened horizontal beam for the ultimate in comfort lighting. (Lighting Zones 1 & 2)

Spot: A longer and narrower 9° beam focus for illumination further down the trail or road.  The Spot pattern is designed to be used in conjunction with additional Wide Driving and/or Driving/Combo beam lights. (Lighting Zone 4 & 5)

Work/Scene: Excellent work light or “scene light” with an extremely smooth 120° circle that projects about 40ft.  This pattern is not suitable for driving. (Lighting Zone 7)

The Stage 4 shocks offer the performance of our latest technology in a package that is more accessible and easier to use. They are ideal for racers and weekend warriors who are looking for high-performance shocks with great adjustability of key parameters.

Adjustments:

– Low-Speed Compression
– Rebound
– Spring Preload

Sold as a pair

** When placing your online order please add your shock set up details listed below in the "Comments" section of the check out screen:

Model of ATV

Type of A-arms (standard or Long Travel)

Rear swing arm length (stock or +?)

Rear swing arm shock linkage (Stock or type)

Rider Weight (In full Gear)

Type of Riding (Recreational, Motocross, Dunes, Cross Country, or Desert)

Rider Skill Level (A class, B class intermediate, or Pro)

** ALL SHOCKS ARE BUILT TO ORDER AND ARE NON- RETURNABLE**

The Lone Star Racing DC-PRO Foot Pegs feature a wide foot peg with aggressive inner crisscross teeth to aid in traction and reduce boot wear. They have an aggressive rake on the ends to prevent your foot from slipping off of the peg and can be purchased as just a foot peg or combo them with our heel guards.

• Sold as a pair
• Comes with pro-peg mounts to bolt to frame.(uses stock bolts)
• Heel guards are made from 4130 chromoly. No finish option will be powder coated silver unless otherwise specified.
• Heel guards will not work on Raptor 700.
• You must drill the foot peg and pro-peg and bolt on using supplied bolts.

The Lone Star Racing Steering Stem  is made from 4130 chromoly for superior strength and comes with a billet aluminum handlebar clamp kit. 

• Anti-Vibe clamp only available on +2 stems
• +2+0 height is most popular
• Fits 2009-UP model years

The Lone Star Racing DC-4 A-Arms are +1.125" wider with 1" forward placement per side. They will require a longer shock for better perfomance and handling and feature caster adjustability. The A-Arms are back by our Lifetime Warranty.(excluding wear items)

• Comes with press in style ball joints
• Shock Specs:

          Extended Length: 18.75"
          Shaft Travel: 5 1/4"
          Motion Ratio: 2.05:1